RAID 4-Bay Especificações descarregar pdf (Página 22)

Customizing Your Seagate® NAS Customizing Network Settings

Seagate Business Storage NAS Administrator Guide 22

When you enable your Seagate NAS as a media server, files are automatically downloaded

into specific folders. You need to create those folders on your NAS before you enable the

service.

Access the Public shared folder on your Seagate NAS, and create the following folders:

• Our Music

• Our Pictures

• Our Videos

In the NAS Manager, go to Media > Media Service. Click Enable.

Customizing Network Settings

You can customize these network settings in your Seagate NAS.

• LAN/IP Address

• Network Mode

• Enable DSN Server

• Specify MTU Size

• IP Filters

• Web Services

• Workgroup

• Dynamic DSN

• Printer Manager

Configuring Your LAN/IP Address

Select a LAN port to use when connecting to your network: LAN 1, LAN 2 or Aggregation.

Note: Seagate 1-Bay NAS has one LAN configuration only.

Aggregation allows you to connect to the network using both LAN ports simultaneously:

• Round Robin LAN: Load balance your LANs.

• Fail Over LAN: One LAN network takes over if the other one fails.

Setting a Network Mode

By default, your Seagate NAS’s network mode is set to use Dynamic Host Configuration

Protocol (DHCP). By selecting DHCP, the DHCP server assigns IP addresses to your NAS

automatically. Unless you are part of a large corporation with an IT department, Seagate

highly recommends using the DHCP network mode.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 41 42

Sem comentários

RAID 4-Bay Especificações Página 22